
11
MODEL FRS 30 FRS 38 FRS 51
Power - HP 1.5 1.5 2
Supply voltage - Vac 115 115 230
Supply frequency - Hz 60 60 60
Phase 1 1 1
Full load amps - A 14.4 14.4 8.3
Blade motor - rpm 3400 3400 1700
Blade capacity - in. (mm) 10 (250) 10 (250) 14 (350)
Arbor size - in. (mm) 5/8 (15.9) 5/8 (15.9) 1 (25.4)
Length of Cut - in. (mm) 30 (750) 38 (950) 51 (130)
Depth of Cut at 90° - in. (mm) 2.6 (65) 2.6 (65) 4.1 (105)
Depth of Cut at 45° - in. (mm) 1.2 (30) 1.2 (30) 2.4 (60)
Cutting table 36.5 x 17.3 44.5 x 17.3 60 x 22.5
L x W - in. (mm) (930 x 440) (1130 x 440) (1520x 570)
Side extension 12.1 x 11 12.1 x 11 15.7 x 13.8
L x W - in. (mm) (310 x 280) (310 x 280) (400 x 350)
Saw dimension w/Leg & extension 48.4 x 30.7 x 47.2 56.3 x 30.7 x 47.2 66.9 x 39.4 x 50.8
L x W x H - in. (mm) (1230x780x1200) (1380x780x1200) (1750x1000x1290)
Saw Weight uncrated - lb (kg) 145.5 (66) 154.3 ( 70) 317.2 (144)
Crated weight - lb (kg) 170 (77) 181 (82) 350.5 (159)
3.0 TECHNICAL FEATURES
3.1 TECHNICAL DATA
2.4 STANDARD EQUIPMENT AND
OPTION ACCESSORIES
Standard Equipment:
• Open End 30mm Wrench to change the blade
• Rip Fence
• Side Extension Table
Document equipment:
• Instruction manual
3.2 NOISE LEVEL
Noise produced from the machine on its own is less
than 70dB (A).
General noise level could INCREASE when:
• multiple saws are in the surroundings
• saw is inside of a building
• materials are being cut; some material types produce
more noise than others
• with use of improper acoustic safety devices.
Noise level could DECREASE by:
• reducing the speed rate of cut
• always using blades that are in good condition
• using silent core or Stealth
TM
Blades.
NOTE:
Acoustic pressure over 85 dB (A) could be dangerous
for your hearing health, it is recommended to always
use an approved hearing safety device while operating
the saw.
Kommentare zu diesen Handbüchern