Briggs & Stratton 400E Betriebsanleitung PDF herunterladen (Seite 51)

agria Multi-Purpose Machine 400E/400K 51

Safety circuit

Check safety circuit function each time you take up

operation and each time you maintain the machine.

With clutch engaged and upon release of safety

lever (E/3 bzw. G/3) the engine must automatically

come to a stop.

Check electric lines and connections and ex-

change, if necessary.

è - Serviceç

Adjustments on

Hand Lever for Clutch and Wheel

drive

Check play or adjustments each time before you

operate the machine. If necessary, re-adjust (espe-

cially after commissioning the machine during break-

in period, and after exchanging clutch V-belt).

Remove the retaining spring (2) with a screw-driver

or similar tool.

Remove cable end (3) and set pin (4) out of bracket

in hand lever.

Adjust the set pin (4) to a play of X.(Screw set pin

in to reduce play, screw out to increase play).

Place cable end and set pin back into bracket and

check.

Fit retaining spring (2).

 Hand lever for wheel drive:

X = 3 - 5 mm

 Hand lever for clutch:

X = 2,5 - 4 mm

However, the basic setting is adjusted in neutral

position.(see “Adjusting V-Belt Tension”).

5. Maintenance





1 Hand lever for

clutch

2 Retaining spring

3 Threaded end

of cable

4 Adjusting pin

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

Keine Kommentare

Briggs & Stratton 400E Betriebsanleitung Seite 51